Block Machine PLC Mitsubishi FX3G/FX3GA Block Machine spare parts

Mitsubishi FX3G/FX3GA  PLC – Block Machine spare parts

Mitsubishi FX3G/FX3GA series PLC product features:
■Basic functions
●256 input and output points
The total number of input and output points (128 points) directly connected to the programmable controller and remote I/O (128 points) on CC-Link can be expanded to 256 points.
●Program memory
Built-in 32K-step EEPROM memory.
●Built-in USB communication port
The USB communication port for programming communication function is built-in as standard, which can perform high-speed communication of 12Mbps.
●Built-in RUN/STOP switch
RUN/STOP operation can be performed through the built-in switch. In addition, RUN/STOP instructions can also be issued from general input terminals or peripheral devices.
●Built-in analog knob
Built-in 2 analog knobs for timer setting time and other adjustments.
●Supports writing during RUN
The program can be changed while the programmable controller is RUN through the programming software for the computer.

●Built-in clock function
The built-in clock function can perform time control.
●Supports remote debugging of programs
If you use programming software, you can perform long-distance program transmission and programmable controller operation monitoring through the modem connected to the RS-232C function expansion board and the RS-232C communication special adapter.
■High-speed input and output processing function of the basic unit
●High-speed counter function
Single-phase 60kHz×4 points + 10kHz×2 points, dual-phase 30kHz×2 points + 5kHz×1 point.
●Pulse capture function
You can obtain signals with narrow ON width/OFF width without writing complicated programs.
Input terminal
Signal ON/OFF width
X000, X001, X003, X004
10μs
X002, X005
50μs
●Input interrupt function
Interrupt subroutines can be processed with priority using external signals with an ON width or OFF width of at least 10μs (X000, X001, X003, X004) or 50μs (X002, X005). (With timer interrupt function)
●Pulse output function
When using the output terminal of the basic unit (transistor output type), 3 axes (14 points, 2 axes for 24 points type basic unit) can simultaneously output 100kHz pulses (Y000, Y001, Y002). Various instructions can be used to easily write programs.
●Abundant positioning instructions
Instruction name
Content
DSZR
Mechanical origin return instruction with DOG search function
ABS
Instruction to read the current value from our servo amplifier with position (ABS) detection function
DRVI
Positioning (relative positioning) that specifies the moving distance from the current value position
DRVA
Positioning (positioning) that specifies the target position based on the current value “0”
PLSV
Instruction that can change the output frequency of the pulse train
TBL
Positioning instructions that can batch set positioning actions, moving distances, speeds, etc. in advance
■Display function (display module)
FX3G-5DM display module (optional product) can be built-in.
●Monitoring/testing function
Equipment monitoring/testing can be performed by operating the keys on the display module. In addition, the key operation can be prohibited by the user program.
●Other functions
Clock data can be set, contrast can be adjusted, and error codes can be displayed.