QGM | QFM | HXM | Ruitu | Honchan | HDM | Sanlian | HongFa |
Dekeda | Donyue | HYM | HuaTong | Noah | XieXing | XiangDa | ShengYa |
HuaYuan | FuLang | ZCJK | ONNOH | HUONSS | YiXin | HongYi | XiongHui |
-
QT10-15Automatic Block Making Machine
HuaTong QT10-15Automatic Block Making Machine
2121 Views
QGM QT6 fly ash brick machine
- 2931 Views$US
Sanlian QT6-15 Block Making Machine
- 2300 Views$US
Noah QT4-30 BLOCK MAKING MACHINE
- 2941 Views$US
HXS1100 Hydraulic Pressure Block Machine
- 2432 Views$US
Full Automatic block making machine
- 4315 Views$US
HQTY10-15 concrete brick machine
- 2431 Views$US
Technical Parameter:
Dimension | 5400x2050x3050mm |
Weight | 17.3T |
Pallet Size | 1100 x960mm |
Power | 44.2KW |
Mode of Vibration | Table Vibration |
Vibration Frequency | 4200r/min |
Vibration Force | 90KN |
Cycle Time | 15-25sec |
Production Capacity
Block Type | Picture | Size(L x W x H) | Pcs./Pallet | Pcs./Hour | Pcs./8 Hours |
Hollow Block | 390x190x190mm | 10 | 1560 | 12480 | |
Hollow Block | 390x150x190mm | 12 | 1870 | 14960 | |
Stock Brick | 220x110x70mm | 40 | 9000 | 72000 | |
Paving Block | 200x100x60mm | 36 | 5180 | 41400 | |
Paving Block | 225x112.5x60mm | 24 | 3450 | 27600 |
Notes:
1.We make mould according to size and shape of client’s block.
2.The above is theoretical production;real production depends on raw materials,working efficiency and block specifications.
Features
1.The Machine adopts four galvanized pipe with sleeve bearing to ensure the exact movement of mould.Gear and shaft balance system can make male and female mould move stably.Concrete feeding is revolving,convective and compulsive to ensure block density and reduce feeding cycle. Feeder moving is two curved arms drived by two cylinders,which makes feeder move quickly,durably,and steady.
2.The Mould is made with heat treatments of quenching,tempering,carbonization and boriding.Working life of mould is improved.
3.The Hydraulic System adopts Proportion Direction Valve.The Valve can adjust flow rate and buffer cylinder during the process of production.Therefore,it can protect cylinder and extend life,and Improve the speed and flexibility of each part.
4.The Vibration System adopts German Frequency Conversion Technique.The vibration motor is Frequency Conversion Controlled.The lubrication of Vibrator adopts oil immersed,which improve the using life of Bearing and Gear of vibrator.
5.Adopting International Advanced Microcomputer Control Technology to make Machine and electrical equipment to be one part.The plant can work automatically and cyclically.Our technicians put fault diagnosis,problem alarming into computer by safty logic control.The screen will timely and accurately show fault and methods to client if the machine is in error.
Don't forget to leave your phone number and email, we will reply you as soon as possible!
Inquiry message list :