| QGM | QFM | HXM | Ruitu | Honchan | HDM | Sanlian | HongFa |
| Dekeda | Donyue | HYM | HuaTong | Noah | XieXing | XiangDa | ShengYa |
| HuaYuan | FuLang | ZCJK | ONNOH | HUONSS | YiXin | HongYi | XiongHui |
-
Double Roller Charcoal Concrete Mixer
Wheel roller Concrete mixer，Double Roller Charcoal Concrete Mixer
1709 Views
JS750 concrete mixer cement mixer
- 3825 Views$US
JZC350 cement concrete mixer
- 2621 Views$US
JQ350 Concrete Mixer
- 2483 Views$US
JQ1800 Concrete Mixer
- 2243 Views$US
Hongfa diesel or gas small concrete mixer
- 2092 Views$US
JS750 concrete mixer
- 2155 Views$US
Advantages of Charcoal Mixer Machine:
1.High production efficiency:Using wheel rolling, the raw material has repeatedly rolling and mixing, making
the raw material mixed more fully, improving the bond degree of raw material.
2.Low cost:Low power, high output, low power consumption, high cost performance.
3.Automatic setting:Using gas control switch,can be directly control by computer.without specialized manual
operation.
4.Simple operation:Not need professional technology.
Technical parameters of Charcoal Mixer Machine:
Model | RBM120 | RBM150 | RBM180 | RBM200 | RBM250 | RBM300 |
Mixing disk Diameter(mm) | Φ1200mm | Φ1500mm | Φ1800mm | Φ2000mm | Φ2500mm | Φ3000mm |
Each feeding in(L) | 300L | 500L | 800L | 1000L | 1300L | 1800L |
Mixing cycle(min) | 3-5 | 3-5 | 3-5 | 2-5 | 2-5 | 2-5 |
Capacity(t/h) | 1.5-3.0t/h | 7t/h | 9t/h | 13t/h | 30t/h | 40/h |
Roller Speed(r/min) | 41r/min | 37r/min | 36.1r/min | 35r/min | 30r/min | 30r/min |
Power(Kw) | 7.5kw | 15kw | 22kw | 22kw | 30kw | 37kw |
Size(m) | 1.2*1.2*1.3 | 1.5*1.5*1.6 | 1.8**1.8*1.8 | 2.0*2.0*1.8 | 2.5*2.5*1.8 | 3.0*3.0*1.8 |
Weight(t) | 1.2t | 2.0t | 3.0t | 3.5t | 4.0t | 4.6t |
Working principle of Charcoal Mixer Machine:
Wheel mixer is mainly composed of the grinding wheel,grinding disk,mixing room,scraper, transmission device,
deceleration device, discharging device,frame and so on.The height of wheel can be automatically adjusted,
When have a large or hard material, the rolling wheel can automatically rise,over the hard material, due to its
own gravity and automatically fall.The grinding wheel and rotating shaft is connected through the crank .Motor
drive speed reducer, driven by the roller, scraper, transmission device composed of rolling device rotation.In
the process of rotation, rely on the weight of the wheel the material is mixed,At the same time, the rotation of the
wheel is affected by the friction force.After the material is stirred evenly, open the discharging device, Material
is discharged from the scraper to the discharge port.
Don't forget to leave your phone number and email, we will reply you as soon as possible!
Inquiry message list ：